Basic Operations; New Recording - Olympus DS-5500 Manual De Instrucciones

Note:
• You can set the time and date from
your PC using ODMS and DSS Player
software.
Changing the time and date:
If the current time and date is not
correct, set it using the procedure
below.
1 While the recorder is in stop mode,
press the OK/MENU button.
2 Press the + or − button to select
[Device Menu].
3 Press the OK/MENU button.
4 Press the + or − button to select
[Time & Date].
Device Menu
Memory Select
Cue/Rev
Power Save
Time & Date
Battery
USB Class
BACK EXIT
5 Press the OK/MENU button.
• The following steps are the
same as Step 1 through Step
3 of "Setting time and date
[Time & Date]".
6 Press the F3 (EXIT) button to close
the menu screen.

Basic operations

Recording
By default, the recorder has five
folders, [A], [B], [C], [D], [E]
and you can select a folder by
pressing the F1 (FOLDER) button.
These five folders can be selectively
used to distinguish the kind of
recording. Up to 200 messages can be
recorded per folder.
Also, by default, the Recording Mode
is [QP].
Record function:
Before starting recording over a
previously recorded file, the RECORD
function can be set to the following:
• Append: Attaches the new
recording to the end of the
previously recorded file.
• Overwrite (default): Overwrites
and deletes part of the previously
recorded file starting from the
chosen position.
• Insert: The recorded file will be
inserted in the middle of the
previously recorded file, starting
from the chosen recording position.
The original file will be kept.
By default, the RECORD function
is configured to record using the
overwrite option.
Recording will start from the current
position of the existing file.

New recording

Create a new file to record in.
1 Press the NEW button to create a
new file.
• It is possible to select the Work
Type from the work type list
uploaded using the ODMS
software.
DICT QP Ni
a
MIKE
031
b
/ 030
E F
New File
Remain
c
15 22 40
H M s
FOLDER PRIOR INFO
a Selected Author ID
b New file number
c Remaining recording time
2 Move the slide switch to the
REC (s) position to start recording.
• The red status indicator light
turns on. Turn the microphone in
the direction of the source to be
recorded. When you press the F2
(DISPLY) button during
recording, you can change the
screen displays.
DICT QP Ni
MIKE
031
/ 031
E F
00 10
M s
15 22 30
H M s
VERBAL DISPLY INDEX
3 Move the slide switch to the
STOP (4) position to stop
recording.
• If you want to append additional
recordings to the same file, move
the slide switch to the REC (s)
position again.
DICT QP Ni
MIKE
031
/ 031
02 20
M s
15 02 20
H M s
FOLDER PRIOR INFO
Notes:
• During recording, a beep will sound
whenever the remaining recording
time reaches 60, 30, and 10 seconds.
• When the remaining recording
time reaches 60 seconds, the status
indicator light will start flashing.
The light will flash faster when the
remaining recording time decreases
from 30 to 10 seconds.
• [Memory Full] or [Folder Full] will
be displayed when the memory or
folder capacity is full.
− Delete unnecessary files before
recording any further or transfer
dictation files to your PC.
− Change the recording media
at [Memory Select] setting or
change to a card with free space.
9