Milk Foaming Nozzle; Suggestions How To Obtain A Good Cup Of Coffee - Wega Polaris Manual De Uso

Polaris

15.3 Milk foaming nozzle

Insert the nozzle (A) in the milk
so that the sprayer is complete-
ly covered;
operate the steam knob (4)
horizontally;
wait for the milk to heat and
foam;
upon reaching the desired
temperature and foam, re-
lease the steam knob (4).
To adjust milk foaming pro-
ceed as follows:
Use a wrench to unscrew
component (B) of the milk
foaming nozzle;
Use a screwdriver on the screw
(C) located inside the part:
- to reduce foaming turn clockwise;
- to increase foaming turn counter-clock-
wise.
To keep the milk foaming device in perfect working
order, it is advisable to carry out a delivery dry run
after each use.
!
Keep the ends of the of the nozzle clean at all times
by means of a cloth dampened in lukewarm water.
Use the utmost caution with the milk foaming
nozzle, as high-temperature steam is present.
60
16
4
the hardness of the water used to not exceed 4-5
°f (French degrees). If the water hardness exceeds
these values, it is advisable to use a water softener.
B
is less than 4 °f.
strong, a special filter should be installed.
C
beans. Never grind large amounts of coffee. Use the
A
amount the doser holds and, if possible, use it by
the end of the day. Never purchase ground coffee,
as it expires quickly.
period of time (2-3 hours) carry out a few dry runs.
maintenance.
ed you to contact the Technical Support Service for
the water temperature adjustment.
degree of humidity in the environment.
Suggestions on how to
obtain a good cup of coffee
To obtain high-quality coffee, it is important for
Avoid using a water softener if the water hardness
If the taste of chlorine in the water is particularly
It is not advisable to keep large supplies of coffee
After the machine has not been used for a certain
Make sure to carry out regular cleaning and
If the type of coffee is changed, we recommend-
Adjust the grinding of the coffee according to the
User manual