Medela Basic Instrucciones De Uso página 389

Electromagnetic Compatibility (EMC, IEC 60601-1-2, Table 6)
Recommended separation distance between portable and
mobile RF communications equipment and Basic
Basic is intended for use in an electromagnetic environment in which radiated RF distur-
bances are controlled. The customer or the user of Basic can help prevent electromag-
netic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and Basic as recommended below, according
to the maximum output power of the communications equipment.
Rated maximum
output power
of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 0.35 √ P
0.04
0.11
0.35
1.11
3.5
80 MHz to 800 MHz
d = 0.35 √ P
0.04
0.11
0.35
1.11
3.5
Technical documentation
800 MHz to 2.5 GHz
d = 0.7 √ P
0.07
0.22
0.7
2.21
7
| 389