Symbols - GGP ITALY TR 250 J Manual De Instrucciones

SYMBOLS

2. SYMBOLS
1 2
6
1) Warning! Danger. The failure to use this ma-
chine correctly can be hazardous for oneself and
others.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise le-
vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
11
12 a
b
13
14
3
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
13) Choke
14) Primer
4
7 8
5) Only one cutting line head can be used on this
machine.
6) Do not use pointed, rigid or metal blades or cir-
cular saw blades.
7) Maximum cutting device speed. Only use suit-
able cutting devices.
8) Warning! - Petrol is flammable. Allow engine
to cool at least 2 minutes before refuelling.
9) Warning! - Keep away from hot surfaces.
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
23
EN
5
9
23) Cutting device
rotation direction
3