Spirotech SPIROVENT SUPERIOR S600 Manual Del Usuario página 12

2. Connect the makeup water supply line to the refill
connection line (C).
CAUTION
Use a locally approved backflow
•
protection. A backflow protection can
also be supplied as an option with the
unit.
Make sure that the pressure of the feed
•
water is below the system pressure.
Make sure that the lines leave the unit at
•
the top. This will avoid fast wear of
hoses.
Make sure that the breaktank overflow
•
hose ends inside the unit.
Electrical
CAUTION
Preferably, use a grounded wall socket
•
for the power supply to the unit. The
socket must stay accessible.
Mount an all-pole main switch (contact
•
opening >= 3mm) if the unit is directly
connected to the power supply.
Use supply cables with the correct
•
dimensions.
A
1. Loosen the cable gland (A) and take the connector
out of the frame.
User manual - 3.0
2. Loosen and remove the connector cap (A).
3. Feed a 3-core supply cable (C) through cable gland
(A) and the connector cap (B).
N
2
1
1 L1
N
N
PE
4. Loosen the screws (B).
5. Insert the wires (A) into the correct holes of the
connector plug.
6. Fasten the screws (B).
English
A
A
B
C
A
B
11