Topcom BPM WRIST 3500 Manual De Usuario página 9

10.2 Procedure
• Press the START/STOP button
will be displayed.
• Once the actual Memory zone is displayed (U1-3), press the MEMORY
button to select the desired memory zone.
• Press the START/STOP button
pressed within 5 seconds, the measurement will start automatically.
• The display will show the last measurement result before inflating the cuff
to the level that is right for you.
• When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to approximately 220mmHg if the
system detects that your body needs more pressure to measure your blood
pressure.
• When the measurement is completed, systolic, diastolic and pulse will be
shown simultaneously on the LCD screen.
• When a mistake was detected during measurement the Error icon 'EE'
appears on the display
10.3 Memory
The BPM Wrist 3500 has 3 Memory zones. Each can store up to 40
measurements including the date and time
The result will be stored automatically in the selected Memory Zone after the
measurement.
To recall measurement results:
When the clock is displayed:
• Press the MEMORY button
• Press the START/STOP button
• Press the MEMORY button
• Press the MEMORY button
• After the oldest record is displayed, the unit will switch back to normal time.
To erase all data from one memory zone:
• Press the MEMORY button
• Press the START/STOP button
• Press the MEMORY button
• Press and hold the MEMORY button
records from the selected memory zone.
9
to activate the device. All segments
to start measurement. If no button is
to enter memory mode.
select the desired memory zone.
to see the last measurement result.
repeatedly for prior values stored.
to enter memory mode.
select the desired memory zone.
to see the last measurement result.
for 3 seconds to erase all
TOPCOM BPM Wrist 3500