Field Diaphragm (Optional); Polarizing Set (Optional) - Optica B-380 Serie Manual De Instrucciones

5. Insert the power supply jack in the socket placed
in the rear side of the frame. (Fig. 5)
7.8

Field Diaphragm (Optional)

1. Unscrew the lens ath the base of the microsco-
pe. (Fig. 6)
• It may take a little bit of force to unscrew the
lens.
2. Fully screw the field diaphragm (M-156).
3. System is ready for the use.
7.9

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 7)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 8)
Page 16
Fig. 5
Fig. 6
①
Fig. 7
②
Fig. 8