8.3 Declaration of Conformity within the meaning of the Directive
on Machines 2006/42/EC
Manufacturer:
Mr. Manfred Könning is authorized to compile the technical documentation.
We hereby declare that the following machine complies with all the relevant provisions in the EU Machinery
Directive 2006/42/EU.
Item no.
variation)
Designation:
The machine also complies with other relevant provisions in the following EU directives:
2006/42/EU
2004/108/EU
2006/95/EU
93/68/EEC
The following harmonized standards (or parts of these standards) were applied:
DIN EN ISO 13857
EN ISO 13850
DIN EN ISO 12100
EN 60204 -1
EMVG
EN 610000-6 part 4
EN 610000-6 part 2
The following technical specifications (or parts of these standards) were applied:
VDE 0100-510
VDE 0113-1
UVV BGV A1
DIN 45635-38
Annex VIII to Directive 2006/42/EC was observed. Compliance with the requirements of Low Voltage Directive
was ensured in accordance with Annex I, No. 1.5.1 of Directive 2006/42/EC.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity expires, which was
confirmed in writing by us as manufacturers.
Vreden, 15.01.2014
KEMPER GmbH
Dipl.-Ing. M. Könning
(Head of Engineering)
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
65 150
KEMPER MiniFil
Machinery Directive
Electromagnetic Compatibility
Low-Voltage Directive
Labelling Directive
Safety machines, safety distances to upper and
lower limbs
Safety of machines
Safety of machines - Directives for risk evaluation
Electrical equipment of machines
Law on the Electromagnetic Compatibility of
Devices
Generic standard for emitted interference
Generic standard for interference immunity
Establishing low-voltage plants
Electrical equipment of machines - explanations for
EN 60204-1
Accident prevention regulations Principles of Prevention
Noise measuring on machines
- 66 -
Technical modifications and errors expected.
KEMPER MiniFil Operating manual - EN
(possible deviating item number four other device