USER'S MANUAL. PROLINK-4/4C
L t =L + 10 log N
L t : equivalent total level
L: average level of the carriers group
N: number of carriers
So, if there are ten carriers with a level around 90 dBµV, their equivalent level will be:
90 dBµV + 10 log 10 = 100 dBµV
Observe that in this case, loss of tuning by overload of the RF input may occur besides
other effects such as tuner saturation and generation of intermodulation products that
may mask the spectrum visualization.
4.9.1.1.1 Changing the measurement information format
In TV operation mode, the measurement information format to be displayed
on-screen is selected by pressing key
cyclically:
TV image with a window in the lower part of the screen displaying the signal
-
level and frequency/channel.
TV image with a window displaying information on the name assigned to
-
memory, power supply to external units, sound, colour system, TV standard,
level and frequency/channel.
TV image only.
-
In the case of tuning a FM transmitter that emits RDS service, when pressing the
key
[2] will update the data represented on the screen.
In digital channels, pressing
tuned digital signal. You will need to have previously correctly configured the tuning
process for the digital signal. (See '4.9.1.5 BER Measurement Mode Selection'.) The
time employed in decoding very much depends on the structure and quantity of data
tables within the TS and the condition of your instrument, but is generally less than 20
seconds. It is also possible to select if you want to appear on the monitor information
about digital measurements. Three choices are offered, and may be selected cyclically:
TV image, with a window appearing at the bottom showing the readings
-
associated with the signal and the information given by the tuned digital
service (Network, Provider, Bouquet).
TV image only.
-
Screen showing the digital parameters read by the instrument.
-
06/2005
Premium
[2]. Three possibilities are offered, selected
[2] shows the corresponding TV image for the
Page 33