Verification Of Wi-Fi Systems (Wi - Fi) - Promax PROLINK-4/4C Premium Manual De Instrucciones

Figure 52.- Attenuation measurements in a plug.
In order to finish of measuring, press the rotary selector [4] and select from
FUNCTIONS menu the End Test option.

4.9.4.15 Verification of Wi-Fi systems (Wi - Fi)

This application allows to verify the response of the Wi-Fi communication
networks (Wireless Fidelity), that is a communication standard for wireless connectivity
based on the IEEE 802.11b/g protocol, by means of the spectrum monitoring of used
frequency band and the discrimination among the active channels. The procedure
implies the following steps and elements:
REMARK: For this application is advised to use the PROMAX CV-245 frequency
converter, for which it has been specially designed.
1.- INSTALLATION
Connect the CV-245 to the PROLINK-4/4C
connector-adapter BNC-F.
Power supply the CV-245 through the PROLINK-4/4C Premium, for it select the
Ext. supply function (see section '4.8 External Units Power Supply') by means of
pressing the key [27] and the rotary selector [4 ] select a voltage of 13 V.
IMPORTANT REMARK:
Page 84
10
FUNCIONES
0
-10
-20
1050.0 MHz
1575.5 MHz
REF. 90.0 dBuV
78.0 dBuV
TEST
12.0
ATT.
Using power supply voltages higher than 13 V should be
avoided due to that could damage the CV-245 converter.
USER'S MANUAL. PROLINK-4/4C
2100.0 MHz
91.0 dBuV 90.5 dBuV
74.3 dBuV 65.0 dBuV
16.7 25.5
Premium
Premium
directly by means of
06/2005