Selecting The Measurement To Be Taken - Promax PROLINK-4/4C Premium Manual De Instrucciones

Repeatedly pressing key
following order: Hour, Minute, Second, Day and Month. To alter any of these simply
activate it, turn the rotary selector [4] and press key
updated all the alarm fields, press the rotary selector [4] to validate them and exit the
screen.
If before activating the alarm (ALARM On) no measurement matrix cell has yet
been activated (see section '4.9.4.4.2 Selecting the Measurements to be Taken'), the
bottom of the screen will show the error message "NOT CELLS SEL." (No cells have
been selected) followed by "DL STOPPED" (Datalogger deactivated).
On reaching the time defined in the Start acquisition time field, the instrument
will switch itself on (if it was switched off) or go to the Datalogger mode (if switched on)
to automatically take the measurements and/or produce the print-out.
4.- ERASING MEASUREMENTS
AUTOMATIC DEACTIVATION OF ALL THE CELLS.
The configuration screen also allows you to erase all the measurements stored in
the Datalogger function, as well as automatically deactivating all the activated
measurement configurations. To erase the stored measurements select the Clear field
and press the rotary selector [4]. To deactivate the measurement configurations select
the Unselect field and press the rotary selector [4].
5.- EXITING THE CONFIGURATION SCREEN
To exit the Datalogger function configuration screen press the rotary selector [4].

4.9.4.4.2 Selecting the Measurement to be Taken

Once the Datalogger function has been configured, activate the measurement
configuration(s) (columns) which you would like to use. The headings of the
measurement matrix columns of the Datalogger function coincide with the number of
memorised measurement configurations, simply place the cursor over each column and
you will see the more important parameters displayed at the bottom of the screen (name
assigned to the memory position, frequency/channel, measurement mode and units of
measurement).
To activate the measurement configurations repeatedly press key
the cursor is placed on the columns field, next turn the rotary selector [4] until it is
positioned in the column (memory) that you wish to activate and press the rotary
selector [4].The activated columns are more brilliant than the non activated ones. To
deactivate a column follow the same steps as in activating it.
Page 76
USER'S MANUAL. PROLINK-4/4C
[31] cyclically activates the different fields in the
STORED IN THE
Premium
[31] again. Once you have
DATALOGGER
[31] until
AND
06/2005