Product Description; Tools Needed - ROTOR INpower ROAD Manual De Usuario

1. PRODUCT DESCRIPTION

1.1. INpower® CRANKSET
ROTOR offers two different versions depending on modality: INpower® ROAD and INpower® MTB.
Drive-side crank assembly (right crank + axle) contains the power meter unit and the specific
Bluetooth Smart / ANT+ ®
Non-d rive-side crank assembly
specific to INpower . ®
ATTENTION: DO NOT REMOVE THE
Like the non-drive-side bolt on ALDHU® and VEGAST® cranks, the bolt, washer and self-extractor nut
system is joined to the left crank arm and should not be disassembled. See the section on installing and
removing the cranks to learn more about this process.
TOOLS NEEDED: left and right INpower crank assembly requires the use of the following
tools:
- 10 mm allen wrench.
- 8 mm allen wrench.
- 2 mm allen wrench.
Power meter RIGHT
Drive-side crank assembly
WARNING: DO NOT DISASSEMBLE
TM
sensor ID number.
includes non-drive-side bolt, washer and self-extractor nut
NON- DRIVE-SIDE BOLT AND SELF-EXTRACTO
®
WARNING: DO NOT DISASSEMBLE
Non-drive-side crank assembly
R
Product description 39