ROTOR INpower ROAD Manual De Usuario página 44

2. . 3 DIRECT MOUNT INSTALLATION IN DRIVE-SIDE CRANK
*Use a BB
wrench that is
Shimano®
Hollowtech® II
compatible
DM chainring nut
DM chainring in
position OCP #3
44 Cranks installation
DM nut tool
Introduce the Direct Mount
chainring through the axle and
position it over the drive-side
crank. To properly regulate the
OCP position of your chainring,
align the correspondent
number in the crank with the
OCP mark on the chainring.
Once the chainring is
correctly positioned,
tighten the Direct
Mount nut into the
crank to 35-40 Nm*.