Crank Installation - ROTOR INpower ROAD Manual De Usuario

1. . COMPATIBILITY 2
INpower cranks use a 30 mm Universal ®
Bottom Bracket (UBB) system and the BOOST
standard in the MTB version that's compatible
with BB30, PF30, BBright, BSA30, ITA30, BB86,
386 EVO, BB89, BB92 and BOOST frames.
The necessary spacers required for
installation on whichever frame can be
found in the product packaging.
For more information consult your ROTOR Authorized Dealer or bike dealer to ensure correct
compatibility of ROTOR INpower with your frame.
Visit our website: www.rotorbike.com
2. CRANKS INSTALLATION
When installing your ROTOR INpower for the first time, complete the following steps:
2.1. Spacer verification (page 39).
2. . 2 Uninstall your old cranks (page 41).
2. . 3 Direct Mount installation in drive-side crank (page 41).
2. . 4 Drive-side crank assembly installation (page 43).
2.5. Left-side crank assembly spacer selection (page 43).
2.6. Left-side crank assembly installation (page 44).
2. . 7 Fine-tuning adjustment (page 45).
2. . 8 Uninstalling INpower® cranks (page 45).
40 Product description Product description
®
®
WARNING!
Ensure there is no interference between
the cranks and the frame or any other
component part.
WARNING!
Read and understand this manual carefully
before installing your cranks. Improvements
of product specifications may occur without
any prior notification.