Drain; Spin; Stop Routine - Alliance Laundry Systems HC25SN Operación/Programación

At the conclusion of a spin, the drain valve opens,
and the cylinder turns counterclockwise (forward)
at wash speed. This counterclockwise direction
mirrors the spin rotation direction and is, therefore,
considered forward.
The machine should drain in 30 seconds. If
Note:
the machine fails to drain, contact a qualified
service technician.
When the water level falls below the low level, there
is a 15-second delay, during which the computer
continues to monitor water level. If a water level
input is sensed, the computer waits until both high
and low level inputs indicate the machine is empty.
Assuming the computer detects no water level
during the 15-second period, the drain sequence
concludes.
After the drain sequence ends, the speed of the
cylinder increases to the extract speed if the
programmed spin time is not zero. The displayed
time resumes counting down at one-second
intervals.
After the programmed spin time has elapsed, the
computer moves on to the fill step in the next
segment of the cycle. If the spin is at the end of the
cycle, the computer begins the stop routine.
F232073

Drain

Spin

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Stop Routine

When the programmed duration for the machine's
final spin expires, the computer begins the stop
routine.
The stop routine sequence:
l All inputs are turned off.
l A 40-second coast-down (if stop routine is
preceded by a spin)
l 12 seconds counterclockwise at wash speed (if
stop routine is not preceded by a spin)
l A 3-second pause (if stop routine is not
preceded by a spin)
l 12 seconds clockwise at wash speed
l A 5-second pause
l The display shows "donE."
l The door interlock is energized, allowing the
door to be opened
.
:$51,1*
NEVER insert hands or objects into basket
until it has completely stopped. Doing so could
result in serious injury.
Once "donE" is displayed, open the door by
pressing and holding the door unlock button as
described earlier. Once the door is opened, the
computer display will show the most recent cycle
number.
The machine is now ready to begin another wash
cycle.
Safety
SW012
19