Ubicación De Las Calcomanías De Seguridad - Alliance Laundry Systems HC25SN Operación/Programación

Hay calcomanías de seguridad en lugares
importantes de la máquina. Si las calcomanías no se
mantienen de tal forma que se puedan leer, los
P/N 230877
(Sólo OPL)
CONNECTION CAUTION
TO WASHER
1 Install the liquid supply system with a loop in the connection
hose. (see sketch) or locate the liquid pump below the connection
parts to prevent inadvertant introduction of chemicals into the
washer.
2 Use extreme care in handling hazardous chemicals
Consult container labels for instructions.
P/N 230693
SPIN
P/N 230661
PUSH RED BUTTON
BEFORE
TURNING HANDLE
230661
P/N 231065
P/N 231065
WARNING
MACHINE MAY BE HOT
AND CAUSE BURNS
ATTEMPT NO ENTRY UNTIL
BASKET HAS STOPPED
DO NOT WASH ITEMS CONTAINING
HAZARDOUS CHEMICALS, FLAMMABLE
FUMES OR FLAMMABLE MATERIALS.
USE MACHINE WITH WATER ONLY.
DO NOT LET CHILDREN OPERATE OR
PLAY WITH OR AROUND WASHER.
SERIOUS INJURY MAY RESULT
P/N 81968R1
WARNING
HIGH SPIN SPEEDS
DO NOT put any person in
this washer.
To reduce the risk of
serious injury do not open
the door when:
- Clothes are moving, or
- Water in in washer.
IMPORTANT:
In case of power interruption please
allow 2-3 minutes before trying to open
door.
81968R1
P/N 230216
WARNING
DO NOT LIFT MACHINE BY
DOOR HANDLE
DOOR HANDLE WILL NOT SUPPORT WEIGHT
OF MACHINE.
RESULTING DAMAGE WILL NOT BE COVERED
BY WARRANTY.
F232073 (SP)
PUMP
P/N 230877
IMPORTANT
REMOVE SHIPPING BLOCK
BEFORE STARTING MACHINE.
NOTE
A plastic block has been
inserted to prevent the door
from locking durning shipment
P/N 230528
P/N 230528
(Sólo OPL)
230216
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
operadores o técnicos de servicio pueden sufrir
lesiones.
P/N 230206
WARNING!
HIGH VOLTAGE INSIDE
DISCONNECT MAIN POWER BEFORE
REMOVING COVER. ONLY SPECIALLY
TRAINED PERSONNEL SHOULD TURN
POWER ON WHEN COVER IS REMOVED.
230206
THIS MACHINE IS WIRED FOR
208_240V; 3N~ 60Hz
230207
P/N 230207
(Típico)
P/N 230756
(Sólo modelos MC)
FOR SERVICE ONLY
PUSH BUTTON
TO FAST
ADVANCE TIMER
P/N 230756
Figura 1
Seguridad
P/N 230215-1
WARNING ELECTRICIAN
High leg must be connected to L-3.
This machine requires a 208-240 V 3 phase
4 wire system. If the system has a high leg or if
a phase adder is used, the artificial leg or the
high leg must be connected to L-3. If change
of motor rotation is necessary., do not
exchange the L-3 connection.
The ground lug must be connected to a
permanent earth ground.
P/N 230630
Install equipment
ground as per local
code or N.E.C. Art-
cle 250-95
P/N 231146
COPPER
CONDUCTORS ONLY
P/N 231146
P/N 230626
230626
FUSE
CONTROL CIRCUIT
2 AMP
WARNING:
FOR CONTINUED PROTECTION
REPLACE FUSE ONLY WITH FUSE
OF SAME TYPE & RATING
(No está presente en modelos EDC)
P/N 230202
WARNING!
HIGH VOLTAGE INSIDE
DISCONNECT MAIN POWER BEFORE REMOVING COVER.
ONLY SPECIALLY TRAINED PERSONNEL
SHOULD TURN POWER ON WHEN COVER IS REMOVED.
P/N 230215-1
P/N 230630
B005RS3A
47