3. Use the Up or Down key to select the desired
fill temperature. See the following table for fill
options.
Fill Temperature Options
Display
CFIL
HFIL
bFIL
4. Press the Start key.
5. Use the Up or Down key to select the desired
fill level. See the following table.
Water Level Options
Display
LOLE
HILE
6. Press the Start key.
7. Use the Up or Down key to select the desired
supply option. See the table below.
Supply Options
Display
SUP0
SUP1
SUP2
SUP3
SUP4
SUP5
SUP6
SUP7
F232073
Fill Type
Cold fill
Hot fill
Warm fill
Fill Level
Low Level
High Level
Supply
No Supply
Supply 1
Supply 2
Supply 3
Supply 4
Supply 1 and 2
Supply 2 and 3
Supply 3 and 4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
8. Press the Start key.
9. If the machine is equipped with an auxiliary
heating system, use the Up or Down key to
select the desired segment temperature. To
disable auxiliary heat for this segment, set this
value to zero.
Do not program heat steps for machines not
Note:
equipped with auxiliary heat. The machine will
pause for 30 minutes during any step in which the
fill water temperature does not already equal or
exceed the programmed value of the heat step.
10. Press the Start key.
Safety
23