Makita LC1230 Manual De Instrucciones página 9

ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified in
this manual. The use of any other accessories or
attachments might present a risk of injury to per-
sons. Only use accessory or attachment for its
stated purpose.
Number
Part No. application
of teeth
A-90532 60 Mild Steel
Mild Steel
A-90722 60 (Lessened
Noise Type)
Thin Mild
A-90875 78
Steeel
Stainless
A-90847 78
Steel
CAUTION:
• Always use carbide-tipped saw blades appropriate
for your job. Do not cut aluminum, wood, plastics,
concrete, tiles, etc.
• Carbide-tipped saw blades for metal cutting saw
are not to be re-sharpened.
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period of
ONE YEAR from the date of original purchase. Should
any trouble develop during this one year period, return
the COMPLETE tool, freight prepaid, to one of Makita's
Factory or Authorized Service Centers. If inspection
shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace)
without charge.
This Warranty does not apply where:
• repairs have been made or attempted by others:
• repairs are required because of normal wear and
tear:
• the tool has been abused, misused or improperly
maintained:
• alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-
Applicable workpiece & thickness range
Angles Pipes
5/32" or more 1/8"-13/64" 5/32" or more
5/32" or more 1/8"-13/64" 5/32" or more
1/8"-15/64" 3/64"-13/64"
1/8"-15/64" 3/64"-13/64"
EN0006-1
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Socket wrench 17
• Safety goggle
• Lock-off button (Switch button)
• Carbide-tipped saw blade
• 305 mm (12") Carbide-tipped saw blade & work-
piece ranges
Stainless
Channels
Pipes
NA
NA
5/64" or more NA
5/32" or more 3/64"-13/64"
(NA.......Not applicable)
AGES FROM THE SALE OR USE OF THE PRODUCT.
THIS DISCLAIMER APPLIES BOTH DURING AND
AFTER THE TERM OF THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES
OF "MERCHANTABILITY" AND "FITNESS FOR A SPE-
CIFIC PURPOSE," AFTER THE ONE YEAR TERM OF
THIS WARRANTY.
This Warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limi-
tation or exclusion may not apply to you. Some states do
not allow limitation on how long an implied warranty lasts,
so the above limitation may not apply to you.
9
006943
Stainless
Angles
NA
NA
NA
1/8"-5/32"