Fire-Fighting Instructions; Disposal Instructions; Transport; Sun | Powerpack Classic Battery System - HOPPECKE sun | powerpack classic Serie Instrucciones Para El Montaje Y La Operación

Sulphuric acid at the installation site:
Solidify acid with binding agent – e.g. sand, and neutralise it with lime/soda arrange for its dispo-
sal while observing and following the official local provisions and do not let it reach the sewage
system, soil or waterways.

3.5.4 Fire-fighting instructions

DANGER!
In case of a fire at or in the battery system, leave the scene of the fire immediately and notify
the fire brigade promptly.
DANGER!
Wear personal protective equipment.
Use only dry extinguishing agents (powder, type ABC) to extinguish fires. Otherwise there is the
risk of a short circuit.
Wear protective clothing that can withstand acid. In case of contact with water there is the risk of
reactions with the electrolyte (acid) and, as a consequence, of severe splattering.
When extinguishing fires, use a respirator with independent supply of breathing air.
Do not point the fire extinguisher directly onto the battery/batteries to be extinguished. Otherwise
there is the risk that the battery housing will rupture as a result of thermal loads.
Extinguish the fire at short intervals. Otherwise, there is the risk of explosion by potential electro-
static charge on the battery housing.
If plastic, e.g. the battery housing, burns, toxic gases are formed. Leave the scene of fire as
quickly as possible if you are not wearing a respirator.
Ignoring these instructions may lead to severe physical injuries.

3.5.5 Disposal instructions

Old batteries with this sign are reusable goods and must be directed to the recycling process.
Please use the HOPPECKE recycling system. You can get information on the procurement of new
batteries from HOPPECKE Service.
You can reach HOPPECKE Service at the following telephone number: 0800 246 77 32.
According to the label with the crossed-out garbage can, these batteries must not be set out with
the household rubbish.
Pb

3.6 Transport

We package the batteries for dispatch with the greatest possible care, so that they get to you
without being damaged. However, we highly recommend that you examine the delivery for any
transportation damage and for completeness according to the following list of components directly
on its arrival.
Installation and Operating Manual sun | powerpack
7140803000 V1.1 (10.2015)
34
classic
4 sun | powerpack battery system
classic
The sun | powerpack battery system serves to store photovoltaic generated energy. The
classic
systems consist of the following components:
sun | powerpack
(all variants)
classic
• 1x 2.5 m cable set for connection to the inverter
• 1x fuse-protected isolator switch (Isolator switch) including 2 safety fuses and fastening set
• 1x set of signs (Accumulators, fire & smoking, polarity sticker, nameplate and safety sticker)
• 1x condensate separator per carrier
• 1x floor mat per carrier
sun | powerpack 5.5/24 and 6.4/48
classic
• 1x battery carrier including cover
• 4x block batteries
• 1x wiring set (5 cable connectors and 8 terminal screws)
• 1x 3 m PVC hosepipe, 2 L pieces, 4 T pieces
• 2x cable screw connections including locknut
• 3x corrugated plates
sun | powerpack 8.0/48 and 11.0/48
classic
• 1x battery carrier including cover
• 8x block batteries
• 1x wiring set (9 cable connectors, 16 terminal screws)
• 1x 3 m PVC hosepipe, 2 L pieces and 8 T pieces
• 2x cable screw connections including locknut
• 6x corrugated plates
sun | powerpack 8.0/24 and 11.0/24
classic
• 1x battery carrier including cover
• 8x block batteries
• 1x wiring set (10 cable connectors, 16 terminal screws)
• 1x 3 m PVC hosepipe, 2 L pieces and 8 T pieces
• 2x cable screw connections including locknut
• 6x corrugated plates
sun | powerpack 16.0/48 and 22.0/48
classic
• 2x battery carriers including covers
• 16x block batteries
• 1x wiring set (16 cable connectors, 32 terminal screws)
• 1x 6 m PVC hosepipe, 4 L pieces and 16 T pieces
• 6x cable screw connections including locknut
• 12x corrugated plates
• 1x cable 2 m for connecting the carriers in parallel
• 1x cable 2.4 m for connecting the carriers in parallel
When using the sun | powerpack
classic
power inverters, the scope of delivery differs as follows:
• No fuse-protected isolator switch, safety fuses and fastening set
• No cables for parallel connection
• 3x cable set 2 m 50 mm 2 for connection to the power inverters
for connection to the HOPPECKE sun | fusebox
• 2x cable set 2.5 m 95 mm 2
• 1x HOPPECKE sun | fusebox type NH1 incl. cable glands (battery fuse protection unit in insulated
housing)
• 4x M8 hex screw with washer and spring washer
• 4x green protective cap as contact protection
Installation and Operating Manual sun | powerpack
systems 16.0/48 and 22.0/48 with multiple chargers or
classic
7140803000 V1.1 (10.2015)
35