Inglesina Darwin infant i-Size Manual De Instrucciones página 31

INSTRUCTIONS
LIST OF COMPONENTS
DARWIN INFANT i-SIZE CHILD CAR SEAT
fig. 1
A Handle
B Handle adjustment buttons
C Belt release red button
D Adapter
E Hood
F Headrest
G Rear belt guide
H Rear release lever
I Headrest and harness adjustment lever
J Harness adjustment button
K Instruction manual compartment
DARWIN i-SIZE BASE
fig. 2
HANDLE ADJUSTMENT
fig. 3 To adjust the child car seat handle (A), press simultaneously the two buttons
(B) and rotate it to the wished position. Make sure that the two buttons (B) completely
come out, after having arranged the handle to the proper position.
fig. 4 The handle of the child car seat can be adjusted to 4 different positions:
a) transport
b) intermediate
c) stability
d) car
To obtain the "car" configuration, rotate the handle to the most forward position.
HEADREST AND HARNESS ADJUSTMENT
fig. 5 To loosen the harness, use the adjustment button (J) by putting a finger in
the slot in the seat (J1) and pulling the belts inside the infant seat at the same time.
fig. 6 Release the central buckle for the harness, using the red button (C), and
settle the child in the child car seat with their back and legs entirely in contact with
the seat.
fig. 7 The harness and headrest (F) can be adjusted in 5 positions simultaneously
to adapt to the growth of the child.
To adjust the height, use the rear adjustment lever (I) and at the same time raise or
lower to the correct position, which can be identified by the Click.
fig. 8 Overlap the two ending parts (C2) and insert them in the buckle (C1) until
hearing the blocking CLICK. Verify the correct closing by pulling the ends of the belts.
fig. 9 Let the belts adhere to the child's body, by pulling its end on the regulator
(J2). A finger should not pass between the belts and the child's body. To loosen the
same, see Fig. 5.
fig. 10 To release the belts, press the red button (C).
31