Environmental Protection
When an approved IND560 is installed in an area classified as Division 2 or Zone
2/22, special AC wiring requirements must be met. See document 64060405,
IND560 Division 2, Zone 2/22 Installation Guide.
Safe Disposal Requirement
Inspection and Contents Checklist
Verify the contents and inspect the package immediately upon delivery. If the
shipping container is damaged, check for internal damage and file a freight claim
with the carrier if necessary. If the container is not damaged, remove the IND560
terminal from its protective package, noting how it was packed, and inspect each
component for damage.
If shipping the terminal is required, it is best to use the original shipping container.
The IND560 terminal must be packed correctly to ensure its safe transportation.
The package should include:
•
IND560 Terminal
•
Installation manual
THE STANDARD IND560 IS NOT INTRINSICALLY SAFE! DO NOT USE IN
AREAS CLASSIFIED AS HAZARDOUS BY THE NATIONAL ELECTRICAL
CODE (NEC) BECAUSE OF COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES.
In conformance with the European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE) this device may not be disposed of in
domestic waste. This also applies to countries outside the EU, per their
specific requirements.
Please dispose of this product in accordance with local regulations at the
collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the
distributor from which you purchased this device.
Should this device be passed on to other parties (for private or professional
use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
•
Documentation CD (includes all manuals)
•
Bag of parts including ferrites, grommets, etc.,
depending on terminal configuration
IND560 Installation Manual
WARNING!
1-7