Mettler Toledo IND560 Guia De Instalacion página 36

Figure 2-2: Opening the Harsh Enclosure
2. Repeat Step 1 for the other slot.
3. After releasing the front panel, lift the bottom of the front panel firmly up and
out (Figure 2-3, 1) until it completely clears the top edge of the bottom
enclosure.
4. Squeeze the top of the front panel to the enclosure slightly and push upward
(Figure 2-3, 2) to unsnap the top two clips, then lift it to clear the two top
clips. The cover will swing down, hinged by two wire cables at the bottom.
1
Figure 2-3: Removing the Cover
IND560 Installation Manual
2
2-3