Mettler Toledo IND560 Guia De Instalacion página 29

FillPlus
The standard Fill-560 cannot store multiple-material formulas. Only one formula
can be structured at any time. Once a change is made to any created formula, the
previous formula is lost.
FillPlus is an add-on program created for the Fill-560. It is a formula management
and storage program that adds the following features to the Fill-560 application
software:
Storage of up to 25 multiple material formulas

Scaling of formulas

A single auxiliary output assignable for each formula

The FillPlus application is written with TaskExpert™, and the tasks associated with
FillPlus run independently of the Fill-560 base code.
Additional information can be found in the Fill-560 & FillPlus Manual, part #
64057366, found on the documentation CD that accompanies these application
software kits or a terminal that has been factory configured with the Fill-560 or FillPlus
software.
COM-560
The COM-560 option is a specialized software module solution focused on the
needs of users utilizing legacy communication protocols or that have special
command requirements. The IND560com maintains all of the standard features
and functions of the IND560 in addition to the specific features and functions of the
COM-560. It provides the following features and functions:
Custom ASCII command template
•
Mettler Toledo Continuous Short output
•
8142 Host Protocol
•
Additional information can be found in the COM-560 Manual on the module's
documentation CD.
Drive-560
The Drive-560 option is a specialized application solution focused on simple
inbound-outbound vehicle weighing requirements. The IND560drive has two
modes of operation: Temporary Tare ID Weighing and Permanent Tare ID
Weighing. Some features of this software include:
IND560 Installation Manual
8530 Host Protocol
•
PT6S3 Protocol
•
SMA Protocol
•
1-15