Eaton xChargeIn Serie Manual De Instalación página 286

Connections and wiring
2) Strip the connection wires to approx. 12 mm. For stranded wires with
3) Insert the flat-head screwdriver (5.5 mm) into the supply terminal as
4) Press the screwdriver straight into the terminal until the contact opens
5) Insert connection wire into the designated terminal opening.
286
fine wires, use wire end sleeves.
shown. The screwdriver must rest on the housing.
completely. The angle of the screwdriver changes while pressing in.
xChargeIn
Installation manual V1.05
© EATON