Interfaces; Options - Eaton xChargeIn Serie Manual De Instalación

Technical data
Relative air humidity:
Altitude:
Rate of temperature change:
Temperature behavior:
12.5

Interfaces

Ethernet interface
Ethernet1:
Data transfer rate:
Ethernet2:
USB interface
Type:
Max. output power:
Enable input
Type:
Type of terminal:
Cross section:
AWG:
Stripping length:
Switch contact output
Type:
Necessary current limitation:
Type of terminal:
Cross section:
AWG:
Stripping length:
12.6

Options

4G/LTE mobile network communication
Supported bands:
310
5 % to 95 % (non condensing)
max. 2000 m above sea level
max. 0.5 °C / min
Automatic power reduction if overheating oc-
curs
®
LSA+ terminals
10/100/1,000 Mbit/s
RJ45 (for debug)
A, USB 2.0 (Hi-Speed)
500 mA
External, potential-free switch contact
Spring-type terminal
2
0.08 – 4 mm
28 – 12
8 mm
External safety extra-low voltage, <50 V AC,
50/60 Hz
<0.5 A
Spring-type terminal
2
0.08 – 4 mm
28 – 12
8 mm
4G with fallback to 3G/2G
● LTE (4G)
Bands: 1, 3, 8, 20, 28
● UMTS/HSPA+ (3G)
Bands: 1, 8
● GSM/GPRS/Edge (2G)
Dual-band
Installation manual V1.05
xChargeIn
© EATON