BRAND Transferpette S -8 Instrucciones De Manejo página 38

Removing of pistons
Disassembling the Manifold
for cleaning or replacing
1.
Disconnect the manifold from the
handle.
2.
Turn both closures of the manifold
housing cover 90° (e.g., using a coin)
and slide off the housing.
3.
Remove both outer Phillips screws on
Z
the nose cone assembly.
Do not loosen the central guide
rod (Z)!
4.
Pull the piston and nose cone as-
sembly apart and separate. Remove
stroke springs.
5.
Place the mounting tool on the pis-
ton nut and screw off the piston nut.
Continued on page 40
Attention:
39