BRAND Transferpette S -8 Instrucciones De Manejo página 39

Disassembling the Manifold
( b )
40
6.
Remove the piston nut with piston
spring and pull out the piston.
7.
Insert the cleaned or new piston and
piston spring ( a ). Screw on the pis-
ton nut and tighten with the mounting
tool. Replace the stroke springs ( b ).
( a )
8.
Reassemble the manifold. The mani-
fold must be screwed counter-clock-
wise into the handle so that it audibly
snaps into place.
Check the instrument for tightness,
mobility and accuracy (see page 36,
"Servicing").