EVBOX Elvi Manual Del Usuario página 12

EN
Activate Elvi
5
Plug Elvi into the power outlet.
6
Switch on the power to the station on the service panel. Elvi
will switch on automatically and the LED ring will be blinking
red. The LED ring's color will switch to GREEN after 2 minutes
indicating that the station is connected to your network,
available and ready to charge your car.
Note: In case the LED ring does not show any color, it may be
due to improper installation of the charging cable. In this case,
please follow the instructions in chapter 8 Change charging
cable.
Note: Please be aware that soon after its registration and
activation, Elvi might start a software update automatically.
Do not switch Elvi off.
Post-installation check list
• The LED ring must be solid GREEN when in the ready state.
• Initiate a charge session and use an EVSE tester.
• The LED ring should turn blue when the charging session is in progress.
• For Elvi with cellular connectivity it might be required to contact your stations'
operator or service provider to commission your Elvi and its cellular connection.
Maintenance
The owner or user is responsible for the maintenance of the charging station,
whereby both the law regarding the safety of persons, animals, property must be
observed, as well as the installation regulations in force in the country of use.
• Dirt and natural organic matter on the outside of the charging station can be
cleaned off using a damp soft cloth.
• Regularly check the EV plug for damage and for foreign matter inside the EVSE
plug.
• To protect the charging cable when not in use, an optional Elvi cable dock is
available for proper plug docking and cable storage. Contact the supplier of
your Elvi for details on options and accessories.
9