EVBOX Elvi Manual Del Usuario página 14

EN
Change charging cable
(optional)
4
Take the new charging cable out of the box. Check that the
rubber sealing ring on the charging plug is in place and not
twisted. This is to ensure that the proper ingress protection
levels are met.
Place the station on its side and plug the cable into the station.
Make sure you press the charging cable until it is firmly secured.
5
Turn the station around and place the front face of the station
on a soft and stable surface.
Insert the bolt and tighten it firmly with the supplied
Torx T30 bit.
6
Place the station on its side.
Caution: Double check that the charging cable plug is
properly secured into the station with the bolt.
7
Align the station against the wall dock and the connectors and press it in a straight line until
you hear a clicking sound. To ensure that the connection is fully secured, press firmly on all
four corners and check that there is no air gap between the wall dock and the station.
11