EVBOX Elvi Manual Del Usuario página 7

Ocultar thumbs Ver también para Elvi:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety regulations
Incompetent installation or repairs may result in danger to the user and could
result in warranty void.
Do not install a faulty charging station or a station with a noticeable issue. For
instructions on installation, see chapter 5 "Install Elvi".
Do not switch on the product if any of the present covers are not properly in
place.
Ensure that the charging station or the charging cable never come into direct
contact with heat sources or water.
Ensure that the charging station is used under the stated operating conditions
(see "Technical specifications" in chapter 3).
Do not use explosive or readily flammable substances in the vicinity of the
charging station.
Persons unable to assess the dangers involved in operating a charging station
should not use the charging station.
Do not allow children to operate this device. Adult supervision is required when
children are in the proximity of a charging station in use.
Make sure that the charging cable does not become mechanically damaged
(kinked, jammed or driven over) and that the contact area does not come into
contact with heat sources, dirt or water. For proper storage of Elvi charging
cable, EVBox box has designed the Elvi Cable Dock (Article number 290135).
While charging, the cable must be completely unwound and connected to the
vehicle without overlapping loops (this is to avoid the risk of the charging cable
from overheating).
Always pull on the plug's hand grip and never on the charging cable itself.
Do not operate the charging station in temperatures outside the ambient
temperature rating of -31°F (-35°C) to 109°F (43°C). Operating Elvi outside
the indicated ambient temperatures may result into early de-rating of the
applicable output power or early termination of the charging session.
Remarks
This charging station has been designed and tested in accordance with
international standards.
This charging station must be used exclusively for the purpose intended.
The charging station complies with Safety Class I (the charging station is
supplied with a ground terminal for safety) and voltage Category III.
Do not modify the charging station in any way. This will result in loss of warranty
and liability and may lead to dangerous circumstances!
Do not use cleaning solvents to clean any of the Elvi components. The outside
of the charging station, the charging cable, and the connector end of the
charging cable can be wiped with a clean, dry cloth to remove accumulation of
dirt and dust.
EN
4

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido