Ski rack moving from back to front.
Ski rack moving from left to right.
The skis move about a lot.
The brackets D cannot be lowered onto the ski clamps.
The fastening straps show signs of wear due to
rubbing against the skis.
This product has been carefully designed and manufactured. However, should you encounter a
problem, please contact our customer service.
SAV MOTTEZ
Verify that the handle of the mechanism I
(Fig. 10) is tightly locked.
The anti-rotation device V is not properly
installed. (Fig 11.)
Adjust the height of the brackets D in order to
hold the skis firmly, then strap up tightly.
(Figs. 15-17)
Place the skis in each fork according to the size
of the clamps. (Fig. 15)
Verify that the strap protections M are positioned
properly. (Fig. 17)
Available from monday to friday :
from 8.00 am to 5.00 pm.
33 (0)6 85 17 26 71
33 (0)3 20 10 90 25
33 (0)3 20 10 37 87
fmottez@mottez.com
Rue des Frères Mahieu
59193 Erquinghem Lys
Be careful with the height of skis
H = ............m
- A l'attention de Frédéric Mottez, PDG
- France