Foreword; Warranty; Expiry Of Guarantee; When The Warranty Becomes Void - GASPARDO FBR Plus Empleo Y Mantenimiento

1.0 FOREWORD

This handbook contains the use and maintenance instructions
for the mower. This booklet is an integrating part of the product,
and must be kept in a safe place for consultation during the
whole life span of the machine.
The Manufacturer reserves the right to make any modifications
and improvements to the implement as may be considered op-
portune, without being obliged to immediately inform the user.
The Italian text shall be considered valid in the event of dispu-
te.
ATTENTION
• The customer should instruct personnel on accident risks, on
the operator safety devices provided, on noise emission risks
and on general accident prevention regulations provided for by
the international directives and by the law in the country in which
the machines are used.
• In any case, the machine should be used exclusively by skilled
operators who will be held to follow scrupulously the technical
and accident-prevention instructions in this manual.
• It is the user's responsibility to check that the machine is
operated only in optimum conditions of safety for people,
animals and property.
1.1 GUARANTEE
On delivery, check that the equipment has not been damaged
during transport and that the accessories are integral and com-
plete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN
EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when
he has respected the conditions concerning the benefit of the
guarantee, set out in the supply contract.

1.1.1 EXPIRY OF GUARANTEE

Besides what has already been set out in the supply contract,
the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully
followed.
- If the equipment is used badly, defective maintenance or other
errors by the client.
- If modifications have been carried out without written
authorization of the manufacturer and if non original spare parts
have been used.
cod. G19503010

1.2 IDENTIFICATION

Each individual machine has an identification plate (Fig. 1)
indicating the following details:
1) Mark and address of the Manufacturer;
2) Type and model of machine;
3) Unloaded mass, in Kilograms;
4) Mass full load, in Kilograms;
5) Registration of the machine;
6) Year of manufacture;
7) CE mark.
You are advised to note down your data on the form below, along
with the date of purchase (8) and the dealer's name (9).
8) ____________________
9) ____________________
This information must always be quoted whenever assistance
or spare parts are needed.
fig. 1
g
ENGLISH
(1)
(2)
(4)
(3)
(5)
(6)
(7)
25