Replacement Of Belts - GASPARDO FBR Plus Empleo Y Mantenimiento

REPLACEMENT OF BELTS

- Unscrew the screws (M, Fig. 44) and remove the protective
casing.
- Loosen the belt tensioner completely (N, Fig. 44).
- Replace the worn belts with new ones.
- Put these at the optimum tension using the belt tensioner. Belt
play should not exceed 2 centimetres.
- Put the protective casing back in position and fix it in place with
the screws (M, Fig. 44).
REPLACEMENT OF PULLEYS
Notes for replacement of pulleys, if necessary.
- Unscrew the screws (M, Fig. 44) and remove the protective
casing.
- Loosen the belt tensioner completely (N, Fig. 44).
- Remove the belts.
To replace the driving pulley (O, Fig. 45), turn it clockwise; vice
versa, turn the driven pulley (P, Fig. 45) counterclockwise.
TABLE APPROXIMATE FOR CHOICE OF THE CUTTING BAR
Normal Section
(SN)
cod. G19503010
USE AND MAINTENANCE
Self sharping double section
(SD)
g
N
O
Fig. 45
Replaceable tooth
(DS)
ENGLISH
M
P
Tooth normal
(DN)
Fig. 44
41