Technical Specifications; Symbols - Alpina C25 Manual De Instrucciones

SYMBOLS

Maximum noise and vibration levels [1]
Measured sound pressure level at ear's operator (EN ISO 22868)
– Measurement uncertainty (2006/42/EC - EN 27574)
Measured sound power level (EN ISO 22868)
– Measurement uncertainty (2006/42/EC - EN 27574)
Garanteed sound power level (EN ISO 22868)
Vibrations level (ISO 22867)
– Front handle
– Rear handle
– Measurement uncertainty (2006/42/EC - EN 12096)

TECHNICAL SPECIFICATIONS

Engine (2-stroke single cylinder) – displacement
Fuel (petrol/oil)
Power
Chain gauge
Idle RPM
Maximum admissible rpm without load with chain installed
Fuel tank capacity
Maximum power specific consumption
Oil tank capacity
Chain pinion teeth / pitch
Cutting length
Weight (with empty tank)
Maximum chain speed
[1] WARNING! The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than
the one indicated. Safety measures must be established to protect the user and must be based on the load estimate generated
by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be taken into consideration, such
as switching off or idle running.
2. SYMBOLS
dB(A)
dB(A)
dB(A)
dB(A)
dB(A
m/sec
2
m/sec
2
m/sec
2
cm
3
% 40 = 2.5 %
kW
mm 0.050" / 1.27 mm 0.050" / 1.27 mm
< 3000 - 3500
/min
1
/min
1
cm
3
g/kWh
cm
3
mm 220 / 270
kg
m/s
1) Warning! Read, understand and follow all warn-
ings.
2) Warning! Danger of kickback.
3) Use the chain saw with two hands.
4) Read operator's instruction book before oper-
ating this machine.
5) Wear head, eye and ear protection. If you are
using the machine every day in normal con-
ditions, you can be exposed to a noise level of
85 dB (A) or higher.
6) Wear strong working gloves.
7) Wear boots or protective shoes with grippy
soles and steel toecaps.
8) Use appropriate protections for foot-leg and
hand-arm.
9) This saw is for trained tree service operators
only (see Operator's Manual).
EN
89.2
3
106.4
3
110
5.6
7.9
1.5
CJ 300 CJ 300 C
25.4 25.4
40 = 2.5 %
0.9 0.9
< 3000 - 3500
11000 11000
200 200
560 560
140 140
6T / 3/8 8T / 1/4
235
3.2 3.2
21 18.6
3