Antenna Connection - Vimar SL230.T Manual De Instrucciones Para La Conexión Y El Uso

SL230.T - SL230.T.120
Stop push button connection.
Input STOP is normally closed. The opening of the contact causes the gate to stop and the automatic closing time to be suspended. If not used jumper
between COM and STOP. With the push button not engaged, LED DL3 must be on.
Stop N.C.
Common
(negative)
N.B.: if there are no photocells, sensitive edges or stop push buttons in the system, inputs P.IN, STOP, SCL, SOP must be jumpered with COM and
DSW1 Dip switch 8 DSW2 Dip switch 1 must be set to OFF.
Connecting the Gate Open Warning Light.
COMMON (NEGATIVE)
GATE OPEN
WARNING
LIGHT
+24V LIGHT 2W MAX

Antenna connection:

a
17 cm rigid wire is supplied, which acts as an antenna and should be wired to terminal ANT.
23 22
21
EN