Setting The Electrolysis System Production Level - Teuco X762 Manual Del Usuario

SETTING THE ELECTROLYSIS SYSTEM PRODUCTION LEVEL

To select a certain production level, press the
indicator reaches the required production level. The system information display shows
the related value of the production scale. After few seconds, the system set production on
the required level (note that the production at 100% is 6gr Cl
The cell works until the ORP value reaches the set one.
In standard conditions, the production value correspond to the set one. Nonetheless, in
case the water salinity level is out of range (and/or enabled "CELL" alarm), the reached
production value could be lower than the set one which is shown on the display.
/
AUTOMATIC WATER TREATMENT KIT
+
or
During periods with low temperatures, select a
production level between 50-60%.
In case of high temperatures, very sunny and/
or highly used pools, it is recommended to set a
higher value between 70 - 90%.
keys several times until the
/hr).
2
EN
31