PLACING OUT OF SERVICE FOR THE WINTER
Disable chlorine production (see paragraph BLOCK OF THE ELECTROLYSIS SYSTEM).
FOR LONG PERIODS
Disconnect the circuit using the two valves and remove the probes, keeping them damp
at the ends.
Contact your nearest Authorized Technical Assistance Centre (see list attached)
carry out such procedure.
Keep the circuit where the probes are housed flooded by turning off the two circuit shut-
off valves; alternatively, remove the probes and place them in their original packaging,
taking care to keep them wet at all times.
NOTE: The pH/ORP probes are consumable parts and are anyway to be replaced after a
certain period of time.
AUTOMATIC WATER TREATMENT KIT
EN
to
37