Rotex RKHBRD011ABV1 Manual De Instalación página 89

Domestic water heating
Storage function
Automatic storage set point [b-02]?
Yes
Automatic daily pre-programmed?
Yes
Automatic storage
function (default)
Yes
Sufficient hot water?
No
Active daily day
storage [1-02]
Choose start time
[1-03]
Automatic daily
day storage
Automatic daily night storage
[1-00] and [1-01]
Push button
icon will appear, domestic hot
water will be produced at next
scheduled action.
When making domestic hot water,
icon will be blinking (1 second
interval)
Stop
Stop and restart
Enable/disable
RKHBRD011~016ABV1+Y1
Indoor unit for air to water heat pump system
4PW61218-1C – 2012.06
Yes Normal domestic hot water
operation?
Yes No
Storage
operation?
Reheat function
Reheat minimum
temperature [b-00]
Reheat maximum
No
temperature [b-01]
Storage set
point [b-03]
Push
No
Schedule storage Reheat enabled,
function icon continuous
visible
Schedule domestic
Push
hot water
Custom made Reheat disabled
domestic hot water icon not visible
schedule
(*) It is not possible to
see when actual
domestic hot water is
made. If you want to
disable reheat
function and at the
same time domestic
hot water is being
produced in reheat
operation, you have to
push 2 times the
button; 1 time to stop
current reheat
domestic hot water
operation and 1 time
to stop reheat enable.
Push button
No
Yes
Disinfection function
[4-00] (default)
Disinfection set point
[5-00]
Disinfection retention
button
time [5-01]
Day selection [4-01]
Hour selection [4-02]
button (*)
Disinfection function
will operate
depending on
settings request
icon will start
blinking with 0.5
second intervals
Push
Current disinfection
operation will stop,
but restart next
scheduled action.
icon will return to
previous state.
Current domestic hot water operation will
stop, but restart next scheduled action.
icon will return to previous state.
Forced operation
Automatic?
No
Manual storage
function
Automatic
storage set point
[b-02]?
Yes
Push button
for 5 seconds
Domestic hot
water production
will start
immediately
icon will start
blinking with 1
second intervals
button Push button
Domestic hot
water production
will stop.
icon will return
to previous state.
Installation manual
No
Storage set
point [b-03]
40