Husqvarna P 535HX Manual De Usuario página 60

Symbol
Generator fault
Hybrid mode dis-
12 V battery level
48 V batteries
level indicator
Battery tempera-
ture indicator
Preheating bat-
48 V batteries
overcharged
48 V batteries re-
PTO button indi-
PTO button indi-
Parking brake in-
Parking brake in-
60
Shows on the
Name
display
The symbol is
yellow.
indicator
The symbol is
red.
The symbol
shows.
abled
The symbol
indicator shows.
The symbol is
white.
The symbol is
yellow.
The symbol is
red.
The symbol
shows.
The symbol
tery shows.
The symbol
shows.
The symbol
shows.
serve
The symbol
shows.
cator
The symbol is
yellow.
The symbol
shows.
cator
The symbol
dicator shows (green).
The symbol
shows (red).
dicator
Cause / Action
The 48 V generator is too hot.
The 48 V generator has a fault.
Speak to your Husqvarna servicing dealer.
To charge the 12 V battery on
Low voltage. Refer to
page 56 .
The batteries level is in the correct range.
The batteries level is low.
The batteries are empty.
The 48 V batteries are too cold.
Preheating of 48 V batteries are running.
The 48 V batteries are fully charged and no more charge
is accepted. For example when you go down a slope
when the 48 V batteries are fully charged. Start the hy-
brid drive to decrease the batteries level.
The hybrid mode is disabled and the 48 V batteries re-
serve is used (<20%). The 48 V batteries can only be
charged with the power supply. Do not use the product
and speak to your Husqvarna servicing dealer if this
symbol shows.
The PTO button is engaged. Refer to
Off) button on page 9 .
Incorrect start or stop procedure. Refer to
product on page 34 .
The PTO button is engaged but there is no drive to the
blades or other equipment. Refer to
Off) button on page 9 .
The automatic parking brake is engaged.
The manual parking brake is engaged.
PTO (Power Take-
To stop the
PTO (Power Take-
1591 - 001 - 21.12.2020