Technical Data - Husqvarna P 535HX Manual De Usuario

Technical data

Dimensions
Weight without cutting deck, with empty tanks, kg
Tire dimensions
Tire pressure, kPa/bar/PSI
Max. slope, degrees
Engine
Brand/Model
Nominal engine output, kW @ 3000 rpm
3
Displacement, cm
Max. engine speed, rpm
Diesel fuel, min. octane grade
Tank volume up to max fuel level, l
Oil, API class CF-4 or better
Oil volume incl. filter, l
Oil volume excl. filter, l
Start motor
Cooling system
Cooling system capacity, l
Antifreeze
Hydraulic system
Working pressure, bar
Max. oil flow, l/min
Hydraulic tank capacity, l
Hydraulic system capacity, l
Hydraulic oil
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
3
To meet the emission regulations, the fuel need to meet the standard EN590 or ASTM D975 and have a Sul-
phur content of less than 500ppm or 0,05% of weight. Please refer to the Kubota Operators Manual for further
information regarding fuel quality
4
P 535HX is delivered with fossil free oil. Husqvarna recommends you to continue to use fossil free oil.
64
Technical data
2
3
P 535HX
Product dimensions on page
Refer to
67 .
790
20x10-10
150/1.5/22
10
Kubota D1105
17.8
1123
3000
45 / HVO100
22
4
Class SAE10W-40
3.3
3
Electric start 12 V
4.1
50% propylene glycol
110-130
7.8
4
4.6
UTTO SAE 10W-30 / SAE 80
1591 - 001 - 21.12.2020