Roche Accu-Check Nano Manual Del Usuario página 47

Here is how to mark a test result and initiate a post‑meal test reminder:
1. Perform a test. Do not remove the test strip.
2. Press and release
Pre‑Meal Marker
Pre‑Meal Marker with Post‑Meal Test reminder
Post‑Meal Marker
general Marker
3. When the test result marker ( , , or
you wish to select appears on the display, remove the test strip from the meter.
• If you select the post‑meal test reminder, the meter beeps 1 or 2 hours after the pre‑meal test to
remind you to do a post‑meal test.
• If you select a test result marker, it is automatically stored in memory.
nOTE
The post‑meal marker automatically appears with the test result if a test is performed
15 minutes before or after the post‑meal test reminder is programmed to beep. Set the
post‑meal test reminder time to 1 or 2 hours in the set‑up mode.
to toggle through the test result markers and post‑meal test reminder.
) or pre‑meal marker with post‑meal test reminder (
45
) that