Changing The Batteries - Roche Accu-Check Nano Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing the Batteries

1. Use your thumb to slide the
battery drawer out of the meter.
80
nOTE
• The meter uses two 3‑volt batteries, coin cell type CR2032. This type of battery can be found in many
stores. It is a good idea to have spare batteries available.
• Be sure the batteries are inserted (+) side facing down or facing away from you.
• Always replace both batteries at the same time and with the same brand.
(+) side facing down
2. Remove the old batteries and
place the new ones in the
battery drawer with the
(+) side facing down.
3. Slide the battery drawer back
into position until it locks into
place.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido