Baxi CBP Matic 18 Manual De Instrucciones página 212

a) b)
Figure 29 – Installing the sensor level in the storage unit
2 – Then, you should install the ramp to drop the pellets in the boiler's internal tank.
For this, you should start by removing the right side cover of the boiler's tank –
removing the 4 screw securing it (Figura 30).
Figure 30 – Removing the lateral cover of the boiler's tank
3 – To assemble the ramp to drop the pellets you should insert it in the tank, as
shown in the following pictures, and fasten it with the screws previously removed.
a) b)
49