Commissioning; Possible Settings Via Dip Switch - Lenze E94AYCPM Instrucciones Para El Montaje

7

Commissioning

Possible settings via DIP switch

7 Commissioning
Possible settings via DIP switch
The front panel DIP switches can be used to set
ƒ the station address (switches 1 ... 64)
ƒ compatibility with the EMF2133IB communication module (switch 2133)
Setting the station address
ƒ The station addresses for several interconnected PROFIBUS nodes have to differ from
each other.
ƒ Valid address range: 1 … 126 (max. 125 slave nodes)
ƒ The station address can be set via DIP switches 1 ... 64, or using the »Engineer« (code
C13899 / C14899).
Condition
The labelling of the housing corresponds to the values of the individual DIP switches for
defining the station address.
44
Specification of the station address via ...
DIP switch
At least one switch 1 … 64 = ON
l
E94YCPM001D
C13899 / C14899
All switches 1 ... 64 = OFF (Lenze
standard setting)
All switches 1 ... 64 = ON (invalid
value "127")
EDK94AYCPM DE/EN/FR/ES/IT 6.1