Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
A:
DETAILED COMPONENTS
1.Fireplace with 3 glass doors, grill and ash box
2.Platform of the floor
3.Indoor Heat-resistant panels
4.Baffle plate
5.1 piece framework for panel support
6.1 piece in "U" for to level the back panels
7.Hand for opening 2 doors
8. Grill
9.Bag with 2 hexagonal screws M10x20 and 2 of 0,8mm washer to fix the stand with fireplace, 2 hexagonal
screws M10x30 to level the fireplace and 2 screws to fix the back piper cover to the hood
10.Ash box
11.Tool to manage registers, grill and ash box
12.Pot with aerosol painting for final finish
13.Exothermic glove and anti-scratching cloth for cleaning the plate
14.Envelope containing user's guide: characteristics, assembly, operating and guarantee
15.Bag with 6 plugs of 6mm and 6 agglomerated screw of 4.5x35 to fix the ceiling
16.Ceiling lid Pipe cover (back)
17.Ceiling lid Pipe cover (frontal)
18.Back pipe cover (back)
19.Back pipe cover (frontal)
B:
SCHEME AND MEASURES
C:
ASSEMBLY PICTURES
D:
TECHNICAL CHARACTERISTICS
Parameter
Maximum smokestack intake
Fire type
Fuel consumption
Mass smoke intake
Nominal efficiency
Output
Average temperature of fumes directly into the smoke outlet
CO concentration at an average of 13% O2
Fuel load (test)
Period time to test
Average smokestack intake (test)
Net Weight
Maximum fuel load
1. INSTALLATION PROCEDURES
ALL LOCAL, NATIONAL AND EUROPEAN STANDARDS MUST BE COMPLIED WITH WHEN
INSTALLING THE APPLIANCE.
1.1. Fireplace room. The appliance contains firebricks, ash pan and a fire grate and glass door.
All can be removed to aid transport and installation.
1.2. Smokes exit. Flue pipe is required to connect the appliance to the smokes exit. It must be
the same diameter as the fireplace throat. The minimum length of pipe is 4000 mm from the flue
to the point of discharge. Installation must comply with all regulations and the flue system of
chimney must not be shared with another appliance.
1.3. Floor. The floor must be of suitable load bearing capacity for assembly and installation.
Weak floors can be strengthened with a panel to disperse the weight over a larger area.
1.4. Insulation and safety distances. It is advisable to insulate the back of the chimney. Walls,
ceiling or floor into which the fireplace will be placed, it must not contain any combustible
Value
11-13 Pa
On and Off
4,1 Kg./h
10,52 g/s
80%
15.5 Kw
398º C
0,10 %
3,18 Kg
46 min
12,8 Pa
232,5 Kg
6 Kg
Página 12 de 23
Publicidad
