Amann Girrbach ceramill motion 2 Manual Del Usuario página 60

I N S T A L L A T I O N
▷ Insert the extraction hose of the extraction sys-
tem being used (e.g. Ceramill Airstream) to the
E N
extraction connection ([15] in Fig. 3 on page 53)
on the rear side of the Ceramill Motion 2.
60
Ceramill Motion 2 set-up directly on a table
above the Ceramill Coolstream (table version)
Under the table, a clearance of at least 200 mm is
to be observed toward the sides and the rear, and
at least 10 mm upwards. Minimum space require-
ments for the Ceramill Coolstream below the
table:
_ Height below the table: 675 mm
_ Width below the table: 920 mm
_ Depth below the table: 860 mm
The set-up location must be level.
For the set-up dimensions of the Ceramill
Motion 2, please refer to page 57.
≥ 200
Fig. 9
1 Ceramill Motion 2
2 Ceramill Coolstream
1
≥ 920
≥ 200
2