And Ceramill Motion 2 Software - Amann Girrbach ceramill motion 2 Manual Del Usuario

Requirements on air purity for the Jäger spin-
dle
When another service unit than the one supplied is
to be used, the following connection conditions
according to DIN-ISO 8573-1 must be ensured:
_ Solid contaminants: Class 3
(particle size max. 5 m, particle density max.
3
5 mg/m )
_ Water content: Class 4
(max. pressure dew point +3 °C, water content
3
max. 6000 mg/m )
_ Total oil content: Class 2
(max. oil content 0.1 mg/m
Extraction requirements
When another extraction system than the
Ceramill Airstream is to be used, it must meet the
following requirements:
_ Suction capacity: 56.6 l/min
_ Suitability for zirconium-oxide dusts
_ HEPA microfilter (97.97 %), filter class H12,
dust category M
The connection of the extraction hose to the
machine is made with an adapter (in delivery
scope). The adapter fits extraction hoses with a 38
mm interior diameter.
3
)
I N S T A L L A T I O N
5.3 Installation of the Ceramill Match 2

and Ceramill Motion 2 Software

NOTE:
Malfunction!
▷ Operate the Ceramill Motion 2 only via PCs
delivered by AmannGirrbach!
▷ Insert the Ceramill Match 2 CD-ROM into the
drive of the PC.
The CD contains a PDF file with the installation
guide.
▷ Open the PDF document and follow the instruc-
tions in the guide.
E N
63