Ikegami ICD-809 Manual De Instrucciones página 17

④ REMOTE
The color or monochrome (B/W)
mode can be remotely selected by
getting the remote terminal at the
back of the camera open or short-
circuited. In this state, press the E
button, and the sub-menu screen
shows up. The terminal polarity can
now be preset.
• MAKE
The monochrome (B/W) mode can be selected by getting the remote
terminal short-circuited.
(The color mode can be selected with the terminal open.)
• BREAK
The monochrome (B/W) mode by getting the remote terminal open.
(The color mode can be selected with the terminal short-circuited.)
5-4-3. SHUTTER
(1) This mode is effective, when the light
control is LENS mode.
(2) By L or R button, high speed shutter can
be valid for OFF, FL, 1/125, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10,000, or
Variable.
(3) VARIABLE
Speed of shutter can be changed
variably by L or R button. and the shutter
speed can be displayed on a monitor screen. (When the setting was so made)
ＤＡＹ／ＮＩＧＨＴ
ＣＯＮＴＲＯＬ ＳＩＧＮＡＬ ＭＡＫＥ
ＲＥＴ ＥＸＩＴ
ＶＡＲＩＡＢＬＥ ＳＨＵＴＴＥＲ
ＳＰＥＥＤ Ｌ・・・・Ｉ・・・Ｈ
１／６０
ＲＥＴ ＥＸＩＴ
E-14