Operation; User Setup; Setup Switches And Their Functions - Ikegami ICD-809 Manual De Instrucciones

5. Operation

5-1. User setup

The ICD-809 series camera has a provision of a camera setup and memory function
for camera ID setting, sync system selection, various picture quality setups for
optimum reproduction, back light compensation spot area setting, Privacy Mask
settings, Day/Night change-over thresh-hold settings.
The SETUP MENU is displayed in a system flow chart, and the settings can be
easily executed using the On-Screen-Menu system.
Alteration of these functions may be needed for some installations and we
recommend that you should spend some time to become acquainted with these
functions so that the best results can be obtained from this high performance TV
camera.
5-2. SETUP switches and functions
FOCUS EZ
SET UP
U
L R
D
E
Up Switch (U)
Down Switch (D)
Right Switch (R)
Left Switch (L)
Enter Switch (E)
* To enter the setup mode, hold down the E button longer than 2 seconds.
The push buttons and the markings at left are provided on
the rear panel of the camera.
To be used for a selection of SETUP parameters
(up and down).
To be used to change the settings.
To be used to enter or quit the setup mode and to
save the setup data.
E-9