Metra 99-7803G Instrucciones De Instalación página 7

Climate control
plug covers
(Figure A)
99-7803G
After making all connections start the
vehicle. With the vehicle running, press
and hold the rear defrost button until
the LCD display starts flashing. At this
point the kit is learning the type vehicle
it's connected to (so don't touch
AUTO
anything!). The LCD will stop flashing
A/C ONLY
after 30 to 60 seconds and the kit is
now programmed. This is so the kit
MANUAL
identifies whether it is in a manual or
A/C ONLY
auto climate system.
The 99-7803 climate controls will
function the same way it did from
the factory.
Note: Press and hold the Dual
button for five seconds to switch
the temp display between
Fahrenheit and Celsius.
7
Programming
Changing the display
back light color
1. Press and hold mode button for
5-10 seconds. The display will
start flashing slowly.
2. Press and hold the drivers temp up
button to increase Red.
3. Press and hold the drivers temp
down button to decrease Red.
4. Press and hold the fan up button to
increase Green.
5. Press and hold the fan down to
decrease Green.
6. Press and hold the passenger temp
up button to increase Blue.
7. Press and hold the Driver temp up
button to decrease Blue.
8. After you choose your color stop
pressing the buttons and after
10-seconds the color chosen
will stay.